-
用于多鋰離子/鋰聚合物電池充電器的集成解決方案
工業醫療設備、機器人吸塵器、無人機和大功率揚聲器等電氣設備都需要多電池充電器來供電,而多電池充電器的傳統解決方案通常由幾個分立的功率MOSFET和多個輔助器件組成。 圖1 展示了一個傳統的解決方案。設計人員至少需要三個功率MOSFET,其中兩個用于功率變換,另一個用于防止電池電荷回流至輸入端...
2021-02-07
多鋰離子 鋰聚合物 電池充電器 解決方案
-
開關電源設計原型的分析模擬和實驗
環路控制是開關電源設計的一個重要部分。然而,由于各種原因,在選定主要元件后,研究往往在項目結束時被拋到了腦后。通過簡單的試驗和錯誤分析,我們有時候會覺得,如果設計能夠在示波器上實現可接受的瞬態響應,那么該設計便已準備好用于生產,但這種想法非常不明智,而且可能導致高昂代價。這是...
2021-02-07
開關電源 設計原型 實驗
-
存在互感的電感串并聯
電感器是電路中常見的重要元器件,常用在信號濾波、電能轉換、信號耦合以及磁場檢測等。它利用電磁感應原理對流過的電流的變化產生感應電動勢,兩端的電壓與電流的變化率成正比,其中的比率就是電感的重要參數:電感量,通常記作L。
2021-02-05
互感 電感串并聯
-
想增強電動汽車的熱管理?來了解電池自主平衡功能!
電池平衡功能對于電動汽車(EV)的電池管理系統非常重要,因為它可以增加車輛的行駛里程,并確保電動汽車的電池運行安全。另外,電池平衡功能還被用以修正電池自身存在的不平衡問題。由于制造過程或運行條件中存在不匹配問題,因此在使用一段時間后,所有電池(包括電動汽車中的電池)都會出現不平衡...
2021-02-05
電動汽車 熱管理 電池自主平衡
-
實現電動汽車電池管理系統無線化的BMS方案
借助我們針對電動汽車(EV)無線電池管理系統開發的全新解決方案,客戶可以設計出更輕、每次充電后行駛里程更遠且滿足高水平安全標準的電動汽車,從而提高可靠性。除了舒適的內飾和精美的儀表板,制造商還會在電動汽車的機箱安裝盡可能多的電池。更多的電池意味著更大的充電容量,從而使汽車具有更遠...
2021-02-03
電動汽車 電池管理系統 BMS方案
-
實現汽車電氣化的電池管理功能安全注意事項
電動汽車中的鋰離子電池需要在一定的溫度和工作電壓范圍內工作,才能實現卓越性能和安全運行。為了滿足電動汽車的功能安全標準,本文探討了電池監測器的各種注意事項。
2021-02-03
汽車電氣化 電池管理
-
采用具有驅動器源極引腳的低電感表貼封裝的SiC MOSFET
人們普遍認為,SiCMOSFET可以實現非常快的開關速度,有助于顯著降低電力電子領域功率轉換過程中的能量損耗。然而,由于傳統功率半導體封裝的限制,在實際應用中并不總是能發揮SiC元器件的全部潛力。在本文中,我們首先討論傳統封裝的一些局限性,然后介紹采用更好的封裝形式所帶來的好處。最后,展...
2021-02-03
驅動器 源極引腳 低電感 SiC MOSFET
-
在當今電子應用中,可靠且受控的上電和關斷真的很重要
當今的電子應用常常需要不止一個5 V或3.3 V電源電壓。10個、20個或更多的電壓并不罕見。此外,有的電壓域具有相同的電壓電平,但必須作為單獨的域產生——也就是說,這些電壓必須產生兩次。一個例子是提供兩個相同的電壓來分別為模擬和數字負載供電。這種分離可防止相互干擾,并在不同時間為不同負載...
2021-02-03
電子應用 上電 關斷
-
如何利用微控制器的完全隔離來控制具有電壓和電流輸出的16位輸出模塊
無論是在建筑物中還是在生產車間,如今在任何地方都需要可編程控制器來調節各種生產過程、機器和系統。這就涉及到與相關器件連接的可編程邏輯控制器(PLC)或分布式控制系統(DCS)模塊。為了控制這些器件,PLC或DCS模塊通常具有提供電流輸出、電壓輸出或二者的組合的輸出模塊。工業控制模塊的標準模擬...
2021-02-02
微控制器 隔離 輸出模塊
- 電源中的分壓器
- 貿澤電子為電子設計工程師提供先進的醫療技術資源和產品
- 讓汽車LED照明無死角,LED驅動的全面進化
- 豪威集團推出專為無LED閃爍的汽車攝像頭設計的全新1200萬像素圖像傳感器
- 貿澤開售Microchip WBZ350射頻就緒多協議MCU模塊
- 大聯大品佳集團推出基于聯發科技的AI識別與檢測方案
- Kioxia推出適用于云端和超大規模環境的PCIe 5.0 NVMe EDSFF E1.S SSD
- 利用自動化技術賦能中國基礎設施現代化
- 單結晶體管符號和結構
- 了解交流電壓的產生
- 克服碳化硅制造挑戰,助力未來電力電子應用
- 實現不間斷能源的智能備用電池第五部分:輔助電源系統
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall