你的位置:首頁 > 測試測量 > 正文

NXP SSL2102 30W反激式TRIAC調光LED驅動電源設計指南

發布時間:2012-09-27 來源:電子元件技術網 責任編輯:echotang

導讀:SSL2102 IC是為閃爍調光設計的LED驅動電源,SSL2102 IC可以用在降壓或反激變換器的拓撲結構中,反激拓撲結構在電器輸出隔離上是必須的。當考慮到效率和開關尺寸而選擇輸出電壓額定值時,他可以提供很大的自由度。這份應用指南描述怎樣提高基本的雙向可控硅調光電路實現高性能的設計。


SSL2102是SSL210x調光驅動系列的一部分,好包括:

1.SSL2101: SO16封裝, 集成mosfet和泄放開關
2.SSL2102: SO20封裝, 集成mosfet和泄放開關
3.SSL2103: SO14封裝,外部MOSFET和泄放開關

1.1 The application requirement

When designing an application that can support a wide output voltage range and a constant current, it is important to dimension all components for the maximum output power. The basic application is optimized for a 30 W output and it can be scaled down relatively easily. The application described here, is a retro-fit application using a lamp within an existing infrastructure. The application targets the lower end of the market(commercial, domestic) and has the following specifications:

• Output power of 30 W
• Power factor of 0.7 or larger
• 150 mA peak-to-peak output current ripple (? 10 %)
• Efficiency of 72 %
• The lamp is compatible with a triac dimmers, without noticeable flicker or jumps on the output
• The input voltage is 230 V, 50 Hz
• The output voltage is 42 V, 700mA

1.2 The design choices

The SSL2102 is rated for a maximum output power of 25 W. A higher output power might cause life time issues due to improper cooling. This must be taken into account when the PCB is designed and an extra heatsink might be required.The output power is important for the selection of the transformer. For outputs above 26 W, an E30 or an EFD30 core must be used. The transformer will take up a large part of the required space.The design is optimized for a 230 V (AC) input.

Almost all component values will change when the design is modified for 120 V (AC).Because the input voltage is halved, the input current must be doubled to have the same output power. The buffer capacitance must be doubled, the turns ratio must be changed,the damper resistor can be halved, etc. The brightness control circuit is also optimized for 230 V (AC), which determines the dimmer duty factor by averaging the rectified input voltage.

設計詳情請下載技術資料

要采購開關么,點這里了解一下價格!
特別推薦
技術文章更多>>
技術白皮書下載更多>>
熱門搜索
?

關閉

?

關閉